HYDRAULIC HM
 |
.High performance level. .Very good viscosity-temperature behavior. .High resistance to aging. .Excellent wear protection. .Reliable corrosion protection. .Very good oxidation stability. .Very good demulsification. .Excellent air release, which largely eliminates foam formation. |
| FÜLLEN Fundamental HM 150™ This oil is specifically designed to satisfy the requirements of the manufacturers of hydraulic systems where the highest demands are made concerning high pressure, temperatures or speeds. It is recommended for the hydraulic systems of the following types : Vickers, Gerotor, Gresen, HPM, Denison, Cessna, Hydreco and Worthington. It is also suitable for the lubrication of workshop equipment, reducing gears, bearings, compressed air systems and air screw compressors. | A mineral oil, specifically designed to meet the requirements of most important manufacturers of hydraulic equipment. It contains anti-wear, anti-oxidant, anti-corrosion and anti-foam additives |
| Property | Unit | Test Method | Typical Value |
|---|---|---|---|
| ISO Grade | – | ISO 3448 | 150 |
| Density@15°C | kg/m3 | ASTM D4052 | 890 |
| Kin. Viscosity @40°C | mm2/s | ASTM D7042 | 148 |
| Kin. Viscosity @100°C | mm2/s | ASTM D7042 | 14.5 |
| Viscosity Index | – | ASTM D2270 | 96 |
| Flash Point COC | °C | ASTM D92 | >205 |
| Pour Point | °C | ASTM D97 | -18 |
| Air Release Value @75°C | Minutes | ASTM D3427 | Pass |
| Demulsibility @82°C | Minutes | ASTM D1401 | Pass |
| Material No. Table | ITEM / PACK | HYDRAULIC HM | PACK / PALLET |
|---|---|---|---|
| 1L | – | – | |
| 3.5L | – | – | – |
| 4L | – | – | – |
| 5L | – | – | – |
| 208L | – | IN-HM150-208 | 4 |
| 1000L | – | IN-HM150-1000 | 1 |
